Product Catalog
Featured Products
TAIC DLC-A
is a triallyl isocyanurate, silicon-dioxide blend co-agent for peroxide vulcanization....
Tarene 30
is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a...
CI 25 DLC-A
is a coumarone-indene resin, silicon-dioxide blend widely used in rubber,...All Products
A
A1100 DLC
is a gamma-Aminopropyltriethoxysilane-silicate blend for use with peroxide, sulfur, and metal oxide curing systems.
A172 DLC
is a vinyl-tris(2-methoxyethoxy)silane-silicate blend for use with peroxide curing systems.
A174 DLC
is a gamma-Methacryloxypropyltrimethoxysilane, calcium-silicate blend for use with peroxide, sulfur, and metal oxide curing systems.
A187 DLC
is a gamma-Glycidoxypropyltrimethoxysilane silicate blend for use with peroxide, sulfur, and metal oxide curing systems.
Atlas Burgundy Pitch
is a rosin pitch blended from gum rosin to meet softening point and acid number specifications. The term pitch usually connotes a product that is a residuum of still bottoms. Rosin pitches contain no residuum products. Atlas Burgundy Pitch is used as an adhesive and rubber additive. It is formulated from high quality, closely controlled raw materials and made to meet acid number and softening point specifications.
B
B-3000 DLC-A-70
is a polybutadiene-silicon dioxide blend. Principle use is as a resin reforming agent for EPDM and electrodeposition coating.
C
CI 10 DLC-A
is a coumarone-indene resin, silicon-dioxide blend widely used in the rubber, adhesives, paints, coatings and allied industries.
CI 25 DLC-A
is a coumarone-indene resin, silicon-dioxide blend widely used in rubber, adhesive, paint, coating and allied industries.
CI 50 DLC-A-74
is a coumarone-indene resin-silicon dioxide blend widely used in rubber, adhesive, paint, coating and allied industries.
Co-206 DLC-A
is an ethylene Dimethacrylate, silicon-dioxide blend for peroxide cure of BR, CR, EPM, EPDM, IR, NBR, acrylics, chlorinated PE's, and urethanes. It is a vulcanizing co-agent with peroxide cure; plasticizer during mixing; and hardener.
Co-350 DLC-A
is a blend of trimethylol propane trimethacrylate and silicon dioxide. Natro-Cel 35-A is a coagent used in peroxide cures of BR, CR, EPM, EPDM, IIR, IR and NBR. A vulcanizing co-agent with peroxide cure, it plasticizes during mixing, and hardens on curing.
Co-350W DLC-R-60
is a custom blend of trimethylol propane trimethacrylate, with silicon dioxide. The monomer is ?W grade? (stabilized by HQ) and is dispersed on a special silica carrier at 60% active. It is used for peroxide cures of BR, CR, EPM, EPDM IIR, IR and NBR. A vulcanizing co-agent with peroxide cure, it plasticizes during mixing, and hardens on curing.
Co-351 DLC-A
A is a custom blend of trimethylolpropane triacrylate and silicon dioxide. The monomer is stabilized with MEHQ. Application include vinyl acrylic latex paints, photopolymer (electronics), lithographic, offset, and screen printing inks, exterior architectural paint bases, wood fillers, release coatings, and pressure-sensitive adhesives.
Co-500 DLC-A
is an acrylic crosslinking agent, silicon-dioxide blend for peroxide curing of BR, CR, EPDM, NBR, IR, SBR. It is similar to Co-350 DLC-A, but scorch free.
Co-515 DLC
is an acrylic crosslinking agent, silicate blend for peroxide curing for BR, CR, EPDM, NBR, IR, and SBR. It is similar to Co-350 DLC-A, but scorch-free.
Co-515 DLC-A
is an acrylic crosslinking agent-silicon dioxide blend for peroxide curing for BR, CR, EPDM, NBR, IR, SBR. Similar to Co-350 DLC-A, but scorch free.
Co-517 DLC-A-75
is a co-agent silicon dioxide blend with low color, low staining, scorch retarding aid, which contain non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, this product offers better hardness, good weatherability and heat, water and chemical resistance properties.
Co-519 DLC-A
A is a pre-dispersion of a trifunctional crosslinking agent on silicon dioxide. It is a free-flowing powder and contains a non-nitroso inhibitor package for scorch resistance. It is used for low color, medium functionality, and low staining in applications such as elastomers, plastisols, sealants, and TPE.
Co-521 DLC-A
is a cross-linking agent, silicon-dioxide blend. It is a difunctional, low color, low staining, scorch retarding aid which contains a nonnitroso inhibitor package. When incorporated into peroxide cured natural and synthetic rubber systems, it improves mechanical and performance properties, as well as retards scorch.
D
DBP DLC-A
is a dibutyl phthalate, silicon-dioxide blend polyisobutylene plasticizer for NR, SBR, CR, NBR, IR and IIR. It gives rapid incorporation, aids dispersion of fillers, and reduces pigment requirements in colored stocks.
DEG DLC-A
is a diethylene glycol-silicon dioxide blend used to adjust cure when significant quantities of non-black fillers are used. Rapid incorporation.
DHIN DLC
is a blend of Diisononyl Ester and Micro-Cel E. The chemical name is 1,2-cyclohexane dicarboxylic acid dispersed on calcium silicate. DHIN DLC is an easily dispersed and free-flowing powder developed for use as a plasticizer in applications sensitive to exposure and toxicological issues. It is suitable for use with PVC and other polar polymers and is compatible with all of the monomeric plasticizers. Compared to dispersions of DOP and DINP, DHIN DLC offers improved low temperature performance.
DOA DLC-A
A is a di(2-ethylhexyl) adipate, silicon-dioxide blend plasticizer for NR, NBR, CR, and chlorinated PE. It gives good low temperature properties, excellent incorporation and easy handling.
DOP DLC-A
is a Di-octyl phthalate-silicon dioxide blend plasticizer for NR, SBR, IIR, IR, polyisobutylenes and chlorinated polyethylenes. Large additions may retard cure slightly. Incorporates rapidly; reduces pigment requirements in color stocks; aid filler incorporation.
E
EPDM10 DLC-A
is a free-flowing powder made by combining Trilene liquid polymer and silicon dioxide. The blend is nominally 68% EPDM polymer and 32% silica. It is available as a dry, free-flowing powder that is easy to measure, store and transfer. DLC incorporates quickly and thoroughly into various elastomer systems, and gives quality and processing advantages when compared to neat polymer. Trilene 65 DLC-A is effective in EPDM, BR, NR, SBR and other elastomers.
Epoxy Resin DLC-A
is a blend of silica and Epoxy Resin. When cross-linked or hardened with appropriate curing agents, excellent mechanical, adhesive, electrical and chemical resistance properties are obtained. It is a standard for epoxy resin for formulation and fabrication.
Extra Hard Pitch
is a thermoplastic, acidic resin. It has a high softening point and amber color, and is a product of the naval stores industry obtained during the separation and refining of resins and terpenes extracted from pinewood. Extra Hard Pitch is composed of rosin-type resin acids, oxidized and modified forms of these resins, and neutral and colored constituents associated with dark rosin. Extra Hard Pitch is suggested as a close replacement for gum rosin type products.
L
LP 31 DLC-A
is a liquid polysulfide polymer, silicon-dioxide blend. Widest application is in the building industry. Product is a free-flowing powder that exhibits excellent adhesion to many different surfaces and materials, outstanding resistance to salt and fresh water, weathering oxidation, ozone and high and low temp environmental conditions.
LP 32C DLC-EP-47
is a liquid polysulfide polymer, silicon-dioxide blend. Widest application is in the building industry. Product is a free-flowing powder that exhibits excellent adhesion to many different surfaces and materials, outstanding resistance to salt and fresh water, weathering oxidation, ozone and high and low temp environmental conditions.
M
MARO DLC-A
is a methyl acetyl ricinolate silicon dioxide blend plasticizer and processing aid for low temperature specification rubber compounds. Low volatility.
N
Natro-Cel 100N-A
is a naphthenic petroleum oil, silicon-dioxide blend plasticizer for NR, CR, SBR, EPM, EPDM, NBR, IR, IIR, and polyisobutylenes. It gives exceptionally fast incorporation; aids filler dispersion, and reduces pigment in colored stock.
Natro-Cel 1312-A
is a nitrile rubber, silicon-dioxide blend plasticizer for nitrile rubber compounds requiring improved flow and knitting. It is non-extractable, non-staining, and usually used at 5-14 parts. Its effect on cure can be ignored. At higher levels additional sulfur or accelerator may be necessary (0.5 sulfur per 10 parts liquid Nipol 1312).
Natro-Cel 150N-A
is a petroleum hydrocarbon, silicon-dioxide blend. Calight RPO DLC-A is compatible with synthetic elastomers and their additives. Compatibility increases with naphthenic content and this increases viscosity-gravity constants, aromatic levels and lowers aniline points. Stability to color degradation and resistance to oxidation and aging requires that the level of polar or heterocyclic aromatics containing nitrogen, sulfur, and oxygen be kept to a minimum.
Natro-Cel 200-A-65
is a mixed diaryl p-phenylenediamine, silicon-dioxide blend. It is soluble in natural rubber and plastics.
Natro-Cel 2280P-A
is a paraffinic process oil silicon dioxide blend plasticizer for NR, IR, EPDM, and EPR. Excellent incorporation and easy handling.
Natro-Cel 2400N-A
is a dispersion of naphthenic process oil on silicon dioxide. It is compatible with synthetic elastomers and their additives. Natro-Cel 2400N-A exhibits a balance of properties that make it the preferred choice for non-rubber applications as well. For example; resin extending, PVC, textiles, caulking compounds and other applications.
Natro-Cel 6102-A
is a naval stores-based NR, SR plasticizer, softener. Aids extrusions and processing; renders stocks tacky. Has no effect on cure rate. Prevents scorch.
Natro-Cel 6400-A
is a blend of glycol adipate and silicon dioxide. It functions as a plasticizer with low odor, low volatility and good compatibility.
Natro-Cel 97-A-75
is an aromatic hydrocarbon, silicon-dioxide blend plasticizer/processing aid for NR, SBR, CR, IIR, NBR, BR, EPM, and EPDM. It aids filler dispersion, and gives rapid incorporation. Large loadings may retard cure slightly. Small Mooney viscosity reduction.
Natro-Cel AL-A-70
is an ammonium salt of alkyl phosphate, silicon-dioxide blend used as a mold lubricant and to inhibit corrosion. It removes tack from the surface of freshly mixed stock.
Natro-Cel BCA-A
is a Di(butoxy-ethoxy-ethyl) adipate silicon dioxide blend low temperature plasticizer for NR, SBR, NBR, CR, polysulfides. Rapid incorporation, aids filler dispersion, large loadings may retard cure slightly.
Natro-Cel BCF-A
is a Di(butoxy-ethoxy-ethyl) formal, silicon-dioxide blend, low-temperature plasticizer for NR, SBR, NBR, CR, and polysulfides. It gives rapid incorporation and aids filler dispersion. Large loadings may retard cure slightly.
Natro-Cel C60-A-78
is a low viscosity high chlorine content chlorinated paraffin absorbed on silicon dioxide. Because of its excellent heat stability and compatibility this produce is widely used in PVC formulations as a plasticizer to increase flame retardancy. Natro-Cel C60-A-78 with Its high chlorine content and low viscosity makes an excellent choice for many cutting oil applications. This product also finds many applications in the paint, rubber and fabric coating industries.
Natro-Cel P875-A
is a mercaptan terminated polythioether polymer, silicon-dioxide blend designed for use in room temperature curing, high performance sealants, coatings and adhesives. Permapol P875 DLC-A is particularly suited for formulations where higher service temperatures, improved low temperature flexibility, and resistance to hydrocarbon fluids are desired.
Natro-Cel PE-A
is a low molecular weight polyethylene grease, silicon dioxide blend, used as an internal lubricant and processing aid that helps mold flow, extruding and release. It also prevents tack in green rubber.
Natro-Cel R-A
is a blend of sodium sulfonate and selected process oils on silicon dioxide. Used as an effective dry-form plasticizer and processing aid for NR, SBR, IR, and IIR. Suggested for open-roll mill mixing and used in emulsification, corrosion and wetting applications.
Natro-Cel TATM-A
is a triallytrimellitate, silicon-dioxide blend activator for peroxide cured EPDM & CPE.
Natro-Cel ZPB-A
is a blend of tetra-n-butyl phosphonium benzotriazolate with silicon dioxide. Used as an elastomer curative and adhesion promoter.
Natro-Flex IOT
is an octyl ester of selected tall oil fatty acids for CR, CMS, NBR, SBR, and PVC. Low-temperature plasticizer.
Natro-Rez 10
is a Coumarone-Indene resin widely used in rubber, adhesives, paints, coatings, and allied industries. Natro-Rez 10 is also available as a dry liquid concentrate, CI 10 DLC?-A at 72% actives.
Natro-Rez 25
is a coumarone-indene resin used widely in rubber, adhesives, paints, coatings, and allied industries. Natro-Rez 25 is also available as a dry liquid concentrate, CI 25 DLC?-A with 72% actives.
Natro-Rez 50
is a Coumarone-Indene resin and widely used in rubber, adhesive, paint, coating, and allied industries. Natro-Rez 50 is used primarily in dark rubber compounds as a tackifier and processing aid. Natro-Rez 50 is also available as a dry liquid concentrate, CI 50 DLC?-A at 74% actives.
Natro-Tac K-85
is a blend of resin and solvent used in adhesives and allied industries. The solids component is a thermoplastic, non-polar hydrocarbon resin polymer with 85?C melt point. The solvent is ethyl acetate. The two components are blended at ambient conditions and drummed at 400 lb net.
Natro-Tac T-50
is a blend of TAC and and solvent used in adhesives and allied industries. The TAC is a trifunctional coagent. The solvent is toluene. The two components are blended at near-ambient conditions and drummed at 400 lb net.
Natro-Tar 588
is Pine Tar and is equivalent to natural pine tar in most applications. It is manufactured under closely controlled conditions to ensure quality and uniformity. Applications for which it is suitable include cordage and fish nets; as a preservative and fiber lubricant; as a waterproofing medium for tarpaulins, paper, special lubricants, insecticides and paints; in authentic shipbuilding; in tree surgical uses and many others. It is not recommended for use in Pharmaceuticals and Cosmetics, or similar products.
P
PB1300 DLC-A
is a polybutene, silicon-dioxide blend plasticizer and tackifier for NR, IIR, SBR, EPDM, polyisobutylene and thermoplastic elastomers. It aids compounding, molding, and pressure sensitive and hot-melt adhesives.
Petrolatum DLC-A
is a USP Petrolatum, silicon-dioxide blend plasticizer and lubricant for NR, SBR, IR, IIR, polyisobutylenes. It gives rapid incorporation and aids filler dispersion.
Petrolatum T DLC-A
is a USP Petrolatum-silicon dioxide blend plasticizer and lubricant for NR, SBR, IR, IIR, and polyisobutylenes. It gives rapid incorporation and aids filler dispersion.
Plasticizer SC DLC-A
is a diester of triethylene glycol, silicon-dioxide blend plasticizer, and softener for NR, SR's. Gives low temperature flexibility; improves processing.
Polyester G25 DLC-A
is a high molecular weight polyester-silicon dixoide blend plasticizer for NBR. Improves extrusion properties. Excellent incorporation and easy handling.
R
Rapeseed Oil DLC-A
is a vegetable oil, silicon-dioxide blend that is easy to handle and disperses readily in various elastomeric systems. Rapeseed Oil DLC-A is a safe, effective plasticizer supplied as a convenient free-flowing powder.
S
Silane NX DLC
is a proprietary thiocarboxylate functional silane on synthetic calcium silicate. Uses include sulfur-cure compounding with the ability to achieve excellent dynamic properties at low temperatures (-20?C to +5?C) and reduce small strain non-linearity. Silane NX DLC can also be used in high temp mixing without causing viscosity increase or premature vulcanization. Reduces scorch when compared to other silanes.
T
T-Sol 185H
is a blend of tackifying resins and toluene.
TAC DLC-A
is a triallyl cyanurate, silicon-dioxide blend accelerator for EPM and co-agent for peroxide-cured EP polymers. It reduces cure time, eliminates odor caused by sulfur co-agent, improves heat aging and compression set resistance. Material will freeze and re-mass at ambient temperatures <75?F. Store at 80?F - 90?F. If frozen, product should be warmed to 80?F before use to achieve free-flowing state.
TAIC DLC
is a blend of triallyl isocyanurate and calcium silicate used as a coagent in peroxide cured systems. It enhances cure rate and state, and provides improved batch-to-batch cure rate consistency.
TAIC DLC-A
is a triallyl isocyanurate, silicon-dioxide blend co-agent for peroxide vulcanization. Enhances cure rate and state. Provides improved batch-to-batch cure rate consistency.
Tar-Cel 14-A
is a Tarene, silicon-dioxide blend plasticizer and tackifier for NR, SBR, IR, IIR, and polyisobutylenes. It reduces mill-time over liquid pine tar; gives easier, faster, and more accurate weighing.
Tar-Cel 30-A
is a Tarene, silicon-dioxide blend plasticizer and tackifier for NR, SBR, IR, IIR, and polyisobutylenes. It reduces mill-time over liquid pine tar and gives easier, faster, more accurate weighing.
Tarene 14
is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a naval stores base. The performance properties are comparable to, or superior to, pine tar. Tarene 14 finds its widest application as plasticizer, tackifier, and processing aid in rubber compounding. Other potential uses include adhesives, tar modifications, epoxy extension, coatings, mastics, and use as a low cost acid for emulsions.
Tarene 20
is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a naval stores base. The performance properties are comparable or superior to pine tar. Tarene 20 finds its widest application as a plasticizer, tackifier, and processing aid in rubber compounding. Other potential uses include adhesives, tar modifications, epoxy extension, coatings, mastics, and use as a low-cost acid for emulsions.
Tarene 30
is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a naval stores base. The performance properties are comparable or superior to pine tar. Tarene 30 finds its widest application as a plasticizer, tackifier, and processing aid in rubber compounding. Other potential uses include adhesives, tar modifications, epoxy extension, coatings, mastics, and use as a low-cost acid for emulsions.
Tarene 40
is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a naval stores base. The performance properties are comparable or superior to pine tar. Tarene 40 finds its widest application as a plasticizer, tackifier, and processing aid in rubber compounding. Other potential uses include adhesives, tar modifications, epoxy extension, coatings, mastics, and use as a low-cost acid for emulsions.
Tarene 90P
is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a pitch base, with viscosity adjustments made with a process oil. The performance properties are comparable to or superior to pine tar. Tarene 90P finds its widest application as plasticizer, tackifier, and processing aid in rubber compounding. Other potential uses include adhesives, tar modifications, epoxy extension, coatings, mastics, and use as a low cost acid for emulsions.
TBEP DLC-A
is blend of tributoxyethyl phosphate and silicon-dioxide. Provides very low temperature flexibility to plastics and acrylonitrile elastomers. Used as a plasticizer and a flame retardant in adhesives. It may retard cure with large loadings. Incorporates rapidly; aids filler dispersion; and reduces pigment requirements in colored stocks.
TBTDS DLC-A
is a dry liquid concentrate, sulfur donor accelerator for soluble cure systems. Used in conjunction with a Sulfenamide, Amyl Dithiocarbamate and Octoate Z in Isoprene Rubbers (natural and synthetic). Used in conjunction with Amyl Leadate in black filled Ethylene-propylene-diene Rubbers.
TEA DLC-A
is a triethanolamine, silicon-dioxide blend activator for NR and SBR. It neutralizes clay acidity and is rapidly incorporated. Add directly. Avoid skin contact.
W
Wintergreen 1200-30
is a blend of methyl salicylate and kaolin clay, in the form of a free-flowing powder. It is used as a reodorant in elastomeric blends.