Product Catalog
Featured Products
TAIC DLC-A
is a triallyl isocyanurate, silicon-dioxide blend co-agent for peroxide vulcanization....
Tarene 30
is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a...
CI 25 DLC-A
is a coumarone-indene resin, silicon-dioxide blend widely used in rubber,...All Products
B
B-3000 DLC-A-70
is a polybutadiene-silicon dioxide blend. Principle use is as a resin reforming agent for EPDM and electrodeposition coating.
E
EPDM10 DLC-A
is a free-flowing powder made by combining Trilene liquid polymer and silicon dioxide. The blend is nominally 68% EPDM polymer and 32% silica. It is available as a dry, free-flowing powder that is easy to measure, store and transfer. DLC incorporates quickly and thoroughly into various elastomer systems, and gives quality and processing advantages when compared to neat polymer. Trilene 65 DLC-A is effective in EPDM, BR, NR, SBR and other elastomers.
L
LP 31 DLC-A
is a liquid polysulfide polymer, silicon-dioxide blend. Widest application is in the building industry. Product is a free-flowing powder that exhibits excellent adhesion to many different surfaces and materials, outstanding resistance to salt and fresh water, weathering oxidation, ozone and high and low temp environmental conditions.
LP 32C DLC-EP-47
is a liquid polysulfide polymer, silicon-dioxide blend. Widest application is in the building industry. Product is a free-flowing powder that exhibits excellent adhesion to many different surfaces and materials, outstanding resistance to salt and fresh water, weathering oxidation, ozone and high and low temp environmental conditions.
N
Natro-Cel 1312-A
is a nitrile rubber, silicon-dioxide blend plasticizer for nitrile rubber compounds requiring improved flow and knitting. It is non-extractable, non-staining, and usually used at 5-14 parts. Its effect on cure can be ignored. At higher levels additional sulfur or accelerator may be necessary (0.5 sulfur per 10 parts liquid Nipol 1312).
Natro-Cel P875-A
is a mercaptan terminated polythioether polymer, silicon-dioxide blend designed for use in room temperature curing, high performance sealants, coatings and adhesives. Permapol P875 DLC-A is particularly suited for formulations where higher service temperatures, improved low temperature flexibility, and resistance to hydrocarbon fluids are desired.
P
PB1300 DLC-A
is a polybutene, silicon-dioxide blend plasticizer and tackifier for NR, IIR, SBR, EPDM, polyisobutylene and thermoplastic elastomers. It aids compounding, molding, and pressure sensitive and hot-melt adhesives.