Product Catalog
Featured Products
TAIC DLC-A
is a triallyl isocyanurate, silicon-dioxide blend co-agent for peroxide vulcanization....
Tarene 30
is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a...
CI 25 DLC-A
is a coumarone-indene resin, silicon-dioxide blend widely used in rubber,...All Products
C
Co-206 DLC-A
is an ethylene Dimethacrylate, silicon-dioxide blend for peroxide cure of BR, CR, EPM, EPDM, IR, NBR, acrylics, chlorinated PE's, and urethanes. It is a vulcanizing co-agent with peroxide cure; plasticizer during mixing; and hardener.
Co-350 DLC-A
is a blend of trimethylol propane trimethacrylate and silicon dioxide. Natro-Cel 35-A is a coagent used in peroxide cures of BR, CR, EPM, EPDM, IIR, IR and NBR. A vulcanizing co-agent with peroxide cure, it plasticizes during mixing, and hardens on curing.
Co-350W DLC-R-60
is a custom blend of trimethylol propane trimethacrylate, with silicon dioxide. The monomer is ?W grade? (stabilized by HQ) and is dispersed on a special silica carrier at 60% active. It is used for peroxide cures of BR, CR, EPM, EPDM IIR, IR and NBR. A vulcanizing co-agent with peroxide cure, it plasticizes during mixing, and hardens on curing.
Co-351 DLC-A
A is a custom blend of trimethylolpropane triacrylate and silicon dioxide. The monomer is stabilized with MEHQ. Application include vinyl acrylic latex paints, photopolymer (electronics), lithographic, offset, and screen printing inks, exterior architectural paint bases, wood fillers, release coatings, and pressure-sensitive adhesives.
Co-500 DLC-A
is an acrylic crosslinking agent, silicon-dioxide blend for peroxide curing of BR, CR, EPDM, NBR, IR, SBR. It is similar to Co-350 DLC-A, but scorch free.
Co-515 DLC
is an acrylic crosslinking agent, silicate blend for peroxide curing for BR, CR, EPDM, NBR, IR, and SBR. It is similar to Co-350 DLC-A, but scorch-free.
Co-515 DLC-A
is an acrylic crosslinking agent-silicon dioxide blend for peroxide curing for BR, CR, EPDM, NBR, IR, SBR. Similar to Co-350 DLC-A, but scorch free.
Co-517 DLC-A-75
is a co-agent silicon dioxide blend with low color, low staining, scorch retarding aid, which contain non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, this product offers better hardness, good weatherability and heat, water and chemical resistance properties.
Co-519 DLC-A
A is a pre-dispersion of a trifunctional crosslinking agent on silicon dioxide. It is a free-flowing powder and contains a non-nitroso inhibitor package for scorch resistance. It is used for low color, medium functionality, and low staining in applications such as elastomers, plastisols, sealants, and TPE.
Co-521 DLC-A
is a cross-linking agent, silicon-dioxide blend. It is a difunctional, low color, low staining, scorch retarding aid which contains a nonnitroso inhibitor package. When incorporated into peroxide cured natural and synthetic rubber systems, it improves mechanical and performance properties, as well as retards scorch.
N
Natro-Cel TATM-A
is a triallytrimellitate, silicon-dioxide blend activator for peroxide cured EPDM & CPE.
T
TAC DLC-A
is a triallyl cyanurate, silicon-dioxide blend accelerator for EPM and co-agent for peroxide-cured EP polymers. It reduces cure time, eliminates odor caused by sulfur co-agent, improves heat aging and compression set resistance. Material will freeze and re-mass at ambient temperatures <75?F. Store at 80?F - 90?F. If frozen, product should be warmed to 80?F before use to achieve free-flowing state.
TAIC DLC
is a blend of triallyl isocyanurate and calcium silicate used as a coagent in peroxide cured systems. It enhances cure rate and state, and provides improved batch-to-batch cure rate consistency.
TAIC DLC-A
is a triallyl isocyanurate, silicon-dioxide blend co-agent for peroxide vulcanization. Enhances cure rate and state. Provides improved batch-to-batch cure rate consistency.